Ideal for programming and configuration of the QTech MPC, SMS Controller and Wireless Point to Point (WP2P) modules (v4.10+).

The post USB Programming Cable – Type A-B appeared first on DATRAN Australia.

The UPS - 12V DC 18W Plug Pack is suitable for all of the SMS Lite and Wireless Point to Point (WP2P) modules from DATRAN Australia.

Other applications of the Mini UPS include routers, modems (including fibre optic), VOIP phone systems, surveillance equipment, alarm systems and many telecommunications devices.

The UPS is supplied with a 2m output cable and a selection of interchangeable DC male jacks, including the 2.1mm DC jack for the SMS Lite and WP2P products.

The UPS is suitable for proving emergency power backup for:

SMS Lite - part number PD8640-4G

WP2P Digital - part number PD8810E-WP2P

WP2P Analogue - part number PD8812E-WP2P-A

WP2P Slave (for MPC systems) - part number PD8810E

WP2P Repeater - part number PD8811E

Please ask about our full range of antennas and other accessories. for our wireless control solutions.

For more information please contact our sales and support team.

The post DC Mini UPS – 12V 18W Plug Pack appeared first on DATRAN Australia.

The mounting bracket provides easy DIN rail mounting options in switchboards or control panels.

The mounting bracket is made from 2mm mild steel with a powder coated finish and is supplied complete with an aluminium DIN rail clip.

Two sets of mounting holes are provided on the bracket to suit different QTech product ranges.

The DIN rail bracket mounts the SMS Lite WP2P module vertically to minimise the DIN rail space used.

The DIN rail mount is suitable for:

SMS Lite - part number PD8640-4G

WP2P Digital - part number PD8810E-WP2P

WP2P Analogue - part number PD8812E-WP2P-A

WP2P Slave (for MPC systems) - part number PD8810E

WP2P Repeater - part number PD8811E

All mounting holes are for 4mm fixings.

Please ask about our full range of antennas and accessories. for our wireless control solutions.

For more information on the DIN rail mount please contact our sales and support team.

The post DIN Rail Mount appeared first on DATRAN Australia.

A 12V DC (+/- 10%) power supply is required, at an operating current of 2 to 12mA.
The 12V DC supply is applied to the +12V and GND terminals of the LSD01.
• The solenoid valve is controlled by the RLY terminals on the LSD01, which operate as a trigger.
When the RLY terminals are closed the solenoid valve will turn ON. When the RLY terminals are opened the solenoid valve will turn OFF.
• The solenoid valve coil wires are connected to the LSD01 terminals labelled BLK and GRN.

Note – If the solenoid valve operates in reverse, simply swap the BLK and GRN wires on the LSD01.

Latching coils and the QTech wireless controllers are low power and ideal for being solar powered.
The latching solenoid driver can be integrated into our custom remote solar power solutions (RSS01 and RSS02).

The post Latching Solenoid Driver appeared first on DATRAN Australia.

To be used where battery back up is required

The post Power Supply – 3Amp, 12V DC appeared first on DATRAN Australia.

Indoor use only

This plug pack is recommended for use with our:

• Wireless Point to Point systems (all Digital, Analogue and Digital, Repeater modules
• SMS Controllers
• QDR Digital Radios
• Q48 P2P systems
• Multipoint Controller

(Mainly used with Centre Pivots with 110V AC supply)

The post Power Pack – 110V AC Input – 13.8V DC Output appeared first on DATRAN Australia.

In-Line Power Pack - 230V AC Input - 13.8V DC Output

This power pack is the perfect match for all WP2P and SMS products.

This plug pack is recommended for use with our:
• Wireless Point to Point systems (all Digital, Analogue and Digital, Repeater modules)
• SMS Controllers
• QDR Digital Radios
• Q48 P2P systems
• Multipoint Controller

The post Power Pack – 230V AC Input – 13.8V DC Output appeared first on DATRAN Australia.

This plug pack is for use with all the WP2P and SMS cellular products.

This plug pack is recommended for use with our:
• WP2P Wireless Point to Point - All Digital, Analogue and Repeater modules
• SMS Lite
• SMS Controllers
• QDR Digital Radios
• Q48 P2P systems
• Multipoint Controller

If requested, this can be supplied with optional 3-pin Phoenix connector

The post Plug Pack – 230V AC Input – 13.8V DC Output appeared first on DATRAN Australia.

Ideal for use with the QTech Wireless Point to Point (WP2P) modules, WP2P Repeater and the 4G SMS Lite controller.

Alternatively, a range of power packs are available with this 2.1mm Jack for powering these products.

The post DC Power Cable – 2.1mm Jack appeared first on DATRAN Australia.