QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS485 appeared first on DATRAN Australia.

QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS232 appeared first on DATRAN Australia.

WRTUs are available with digital I/O (WRTU-D) and with digital & analogue I/O (WRTU-DA).
The WDR Data Radio connects via USB to the DATRAN XL4 Plus RTU or to the DATRAN VI SCADA base station.

An integral 900MHz digital radio (ISM band) gives a range of several kilometres using optional antennas.

The WRTU system also supports the use of a wireless repeater to extend the range – wireless repeaters are available with and without local I/O.
WRTUs are low power and suitable for use with a solar charger or can connected to a permanent DC supply.

WRTU systems are the perfect choice for monitoring remote tank levels, flow meters, pump status, door entry etc.

The post WRTU – Wireless RTU appeared first on DATRAN Australia.

Supporting over 65,000 data points, the XL4 Plus RTU is ideally placed to provide telemetry and control for Modbus or AB- DF1 PLCs, industrial equipment supporting Modbus, and many other sensors and actuators.

• Powerful Q04 Plus processor running an industrial grade real-time operating system
• Massive datalogging memory and capabilities
• Access over 65,000 data points ensuring all data is captured from PLCs and other devices
• Supports multiple instances of Modbus RTU/ASCII/TCP and Allen Bradley DF1 industrial protocols on separate ports
• Modbus and AB-DF1 protocols plus RTU to RTU Store & Forward included as standard
• Base station communications via digital radio, analogue radio, Ethernet, cellular and store & forward
• Redundant base station communications with simultaneous radio and Ethernet communications
• USB configuration with QTech Workbench configuration utility
• Fully backwards compatible with existing DLPs
• Expandable I/O

The XL4 Plus RTU is backed up with our new revision of QTech Workbench configuration utility, DLP IDE and DATRAN VI SCADA System. The XL4 Plus RTU has more memory, has enriched features thanks to the Q04 Plus with RTOS and is a drop-in replacement for the previous XL4 RTU.

The post DATRAN XL4 Plus RTU appeared first on DATRAN Australia.

They are suitable for 1200bps FSK analogue comms using our Q71 External 1200bps Modem or high speed data 2400bps using the QTech Active data interface cable.

Tait TM9315 radios come standard with 100 channels, and variants are available to cover the popular VHF and UHF bands.

The post Tait TM9315 Radio appeared first on DATRAN Australia.

Until now, DATRAN RTUs have been available in two hardware variants:
● Internal 1200bps modem and one RS232 serial port
● Two RS232 ports, no internal modem (eXcel family only)
With more and more DATRAN systems converting to high speed data communications, 1200bps RTUs have become less popular.
The two RS232 port RTU variant is the cheapest RTU in the family and of course, allows you to connect both a data radio and a PLC/HMI etc.

The post Q71 External 1200bps Modem appeared first on DATRAN Australia.

The post CM910 4G Cellular Modem appeared first on DATRAN Australia.

DATRAN VI brings new levels of flexibility to the area of telemetry and SCADA (Supervisory Control and Data Acquisition) software. DATRAN VI is a software-based Telemetry controller not a proprietary hardware solution, so providing a greater flexibility for installations and support.

These systems can now be an integral part of an organisation’s information technology strategy, rather than being viewed in isolation. The software can operate in stand-alone mode on a single machine or in client-server mode over any network.

DATRAN VI was developed to provide comprehensive monitoring and control functionality and more effective sharing of SCADA generated data. The Windows environment provides the stability and performance required for demanding applications.

DATRAN VI is an open system that incorporates many of the standards present in today’s information technology environment, including OPC UA, SSL, and TCP/IP.

Effective monitoring and control is the primary requirement of a SCADA system, however there is an increasing need for more comprehensive secondary reporting and the presenting of data to non-technical operators in a useable format. DATRAN VI provides users with powerful tools for sharing data across a network or between applications. Information can easily be exchanged with commonly used applications such as Microsoft Access or Excel.

Click for Brochure

The post DATRAN VI SCADA Software appeared first on DATRAN Australia.

DATRAN Reporting allows you to create resource consent, DWSNZ compliance, and performance reports directly from the DATRAN VI SCADA database.
The reports can be scheduled and then automatically emailed and even delivered onto FTP sites.

Click for Brochure

Key Features

• Automatic scheduling of reports, every day, week, month etc
• DWSNZ reports and automated resource consent data delivery
• Report Designer Wizard provides step by step guidance
• Email, print or transfer reports to FTP sites
• Data export options for further use in applications such as Microsoft® Excel
• New and improved user interface
• Built in Templates to get you familiar faster
• Insert charts in your report to maximise impact
• Calculations such as Max/Min/Ave/Count/Sum from drop down list
• Fully configurable report layout
• Network operation over LAN/WAN. Report designer can be situated anywhere
• Comprehensive Electronic Help in HTML web format

Key Benefits

• Professional representation of your company performance
• Reduction in human resource requirements to provide reports
• Repeatability of reporting format and structure

The post DATRAN Reporting appeared first on DATRAN Australia.

DATRANVue is a simple and rapid way to produce a graphical and user friendly system or process representation.

Click for Brochure

Click for Application Note on Web Publishing

Interactive navigation buttons allow you to “click through” from a map screen to system status and alarms.
DATRANVue can be easily distributed to many users, each with their own access levels.

DATRANVue comprises two software components:
DATRANVue Designer - To create and design the graphics
DATRANVue Runtime - To display and deploy the GUI to multiple users

Key Features

• Control capability - Simply click buttons to start and stop pumps etc.
• Automatic screen size scaling and pan/zoom features
• HTML Wrapper - Automatically create JPG images of screens for use on the internet
• Simple and direct system integration - no need to create separate Tag names and no I/O Tag limit
• Fully configurable graphics, including size, layout and attributes
• Change display colour and animation to show status of pump/motor etc
• Multiple icon library including user definable graphic option
• Electronic Help in HTML format

Key Benefits

• User friendly real time monitoring and control of site status/usage
• Highly efficient TCP/IP network communications, ideal for remote network users
• Common display method across all sites reducing operator training and increasing familiarisation
• Improved alarm visibility and response times
• The most cost effective solution available, a fraction of the cost of ownership of alternate products

The post DATRANVue GUI appeared first on DATRAN Australia.