QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS485 appeared first on DATRAN Australia.

QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS232 appeared first on DATRAN Australia.

The Multi Point Controller allowing you to create a network of up to eight slave modules over a range of 4km.

Each of the WP2P Slave Modules has three switched inputs and three relay outputs. Now you can operate any of these I/O from the Multi Point Controller and even 'patch' the I/O to other WP2P Slave Modules.

The latest Rev E modules also have a configurable "failsafe" relay output hold function, link and status indicators.

The WP2P Star system is a custom configuration option based on the popular WP2P Digital system.

WP2P star system comprises up to four WP2P modules. One module is configured as a master, and the other three as slaves and maps the I/O between the modules.

The WP2P's do not come with DC power supplies or DC power cables, please select the most suitable option for your application from our range of Accessories.

The price of this unit is for a single unit, please specify the required quantity.

If you need a replacement module for any existing system, the radio code details printed on the original module are needed at time of order. Please add this detail to any online order.

Multi Point Controller configuration is by our class leading Workbench software and the I/O mapping is as simple as clicking the grid.

The post Digital WP2P Module – Single Unit appeared first on DATRAN Australia.

The mounting bracket provides easy DIN rail mounting options in switchboards or control panels.

The mounting bracket is made from 2mm mild steel with a powder coated finish and is supplied complete with an aluminium DIN rail clip.

Two sets of mounting holes are provided on the bracket to suit different QTech product ranges.

The DIN rail bracket mounts the SMS Lite WP2P module vertically to minimise the DIN rail space used.

The DIN rail mount is suitable for:

SMS Lite - part number PD8640-4G

WP2P Digital - part number PD8810E-WP2P

WP2P Analogue - part number PD8812E-WP2P-A

WP2P Slave (for MPC systems) - part number PD8810E

WP2P Repeater - part number PD8811E

All mounting holes are for 4mm fixings.

Please ask about our full range of antennas and accessories. for our wireless control solutions.

For more information on the DIN rail mount please contact our sales and support team.

The post DIN Rail Mount appeared first on DATRAN Australia.

A 12V DC (+/- 10%) power supply is required, at an operating current of 2 to 12mA.
The 12V DC supply is applied to the +12V and GND terminals of the LSD01.
• The solenoid valve is controlled by the RLY terminals on the LSD01, which operate as a trigger.
When the RLY terminals are closed the solenoid valve will turn ON. When the RLY terminals are opened the solenoid valve will turn OFF.
• The solenoid valve coil wires are connected to the LSD01 terminals labelled BLK and GRN.

Note – If the solenoid valve operates in reverse, simply swap the BLK and GRN wires on the LSD01.

Latching coils and the QTech wireless controllers are low power and ideal for being solar powered.
The latching solenoid driver can be integrated into our custom remote solar power solutions (RSS01 and RSS02).

The post Latching Solenoid Driver appeared first on DATRAN Australia.

8 Digital & 2 Analogue I/O, wireless remote control solution
The Q48-P2P system provides a remote control solution Monitoring up to eight digital switches and two analogue sensors. As well as controlling up to 8 digital relays and two analogue outputs per Q48 module.
Each Q48-P2P system comprises a pair of modules that are preprogrammed with a unique common communication address, thus allowing for multiple Q48-P2P systems to be used within the same general location.

This system can be considered as a multicore cable replacement option, without the hassle of trenching and installation.

There is no configuration or setup required, simply connect the I/O and DC power and go.

Features

• Inputs/Outputs: 8 Digital Inputs, 8 Digital Outputs, 2 Analogue Inputs, 2 Analogue Outputs
• Simple set up, no programming or configuration required
• Operational Range: Up to 4km with optional antennas (ranges are line of sight).
• State of the art digital radio using 900MHz digital modulation technology
• Power Supply – 12 – 30V DC

The post Q48 Point to Point (Q48-P2P) appeared first on DATRAN Australia.

The post Digital & Analogue Wireless Point to Point System appeared first on DATRAN Australia.

The Wireless Point to Point Repeater enables WP2P modules to cover far greater range or operate in locations with obstructions such as hills, vegetation or buildings. Using the Wireless Point to Point Repeater the wireless signal between the WP2P Modules can be diverted around or over the obstruction.

Each WP2P module in a system has a unique address that allows multiple systems to be used in the same location. Similarly, the repeater module is also tied to a specific set of WP2P modules thus increasing communication reliability.

Key Features

• Low power consumption, (~30mA), ideal for solar installations
• No programming or configuration required
• Line of sight operational range – distance from either of the WP2P modules to the Repeater
• Up to 350m with the supplied antennas and up to 2km with an optional whip antenna.
• State of the art digital radio using 900MHz Digital Modulation technology
• Link Status LED helps diagnostics and shows when the Repeater receives data from a WP2P module

The WP2P Repeater module  can be used with both the Digital I/O WP2P modules and the Analogue I/O WP2P modules. All operating distances are indicative only and terrain dependent.

The post Wireless Repeater appeared first on DATRAN Australia.

The SMS Lite is operational within minutes - the minimum configuration requirement is simply registering a single cell phone number.

All setup is done by sending text messages. Configuration software is not essential but can be used for firmware upgrades.

You can check the status of the devices, receive notifications and manually control the output relays of the SMS Lite all from your cell phone.

Supports 4G bands B1 (2100MHz), B3 (1800MHz), B5 (850MHz), B8 (900MHz), B28 (700MHz) and legacy 3G bands.

 Key Features

• EASY TO USE - Once wired, the unit can be configured by text messages within minutes.
• REMOTE CONTROL - Switch connected devices on or off remotely.
• WIRELESS TECHNOLOGY - Send and receive signals over the cellular network. No need for expensive cabling or travelling to remote sites.
• 2 OUTPUT RELAYS - Output relays are controlled by sending a text containing on, off or pulse instructions.
• 4 INPUTS - Once configured you will receive a text each time any of the inputs turns on or off.
• SMS CONTROL & NOTIFICATION - Receive text messages with status conditions, notifications and control options for up to 8 people.
• SHARED RESPONSIBILITY - Automatically escalate alarms if busy or no reply - escalation time and notification only mode are configurable options.
• BROADCAST MODE - Send an alarm to all phones - configurable option.
• SUPPLY VOLTAGE MONITORING - Automatic DC supply low voltage alarms.
• STATUS UPDATES - Check the status of your device from anywhere, anytime within cellular range.
• ENDLESS POSSIBILITIES - Versatile, reliable and suitable for many applications including remote generator starting, sports field lighting control , flood mitigation systems and alarm system notifications. Popular examples of text alarms are listed here.
• LOW POWER CONSUMPTION - Ideal for Solar Power Installation.
• DIN RAIL MOUNTING OPTION - Simplify panel installation with the optional DIN rail mount.

The 4G SMS Lite is the perfect choice for low cost, low power applications - please watch these short training videos to see just how easy the set up is.

The SMS Lite is supplied with a small stub antenna but also requires a power supply such as our 230V Plug Pack or a DC power cable.

The post SMS Lite 4G appeared first on DATRAN Australia.

• Switch up to 24 pumps or irrigators on and off remotely
• Expand and/or replace existing cable based control systems with quality wireless technology
• Start and stop multiple pumps from a central location
• Monitor electrical faults from many locations at a central point
• Confirm if your irrigator is switched on and pumping water
• Operate multiple devices around your site from a single button press

Key Features

• Low power consumption, ideal for solar and battery installations
• Line of sight operational ranges of up to 4km with optional high gain antennas. Distances are indicative and are terrain dependent.
• State of the art digital radio using 900MHz Digital Modulation technology
• Simple configuration using “Workbench” software and configurable output hold "fail safe" options
• Fault alarm indication when any WP2P module is not communicating
• Competitive pricing

The post Multi Point Controller (MPC) appeared first on DATRAN Australia.