QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS485 appeared first on DATRAN Australia.

QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS232 appeared first on DATRAN Australia.

The Multi Point Controller allowing you to create a network of up to eight slave modules over a range of 4km.

Each of the WP2P Slave Modules has three switched inputs and three relay outputs. Now you can operate any of these I/O from the Multi Point Controller and even 'patch' the I/O to other WP2P Slave Modules.

The latest Rev E modules also have a configurable "failsafe" relay output hold function, link and status indicators.

The WP2P Star system is a custom configuration option based on the popular WP2P Digital system.

WP2P star system comprises up to four WP2P modules. One module is configured as a master, and the other three as slaves and maps the I/O between the modules.

The WP2P's do not come with DC power supplies or DC power cables, please select the most suitable option for your application from our range of Accessories.

The price of this unit is for a single unit, please specify the required quantity.

If you need a replacement module for any existing system, the radio code details printed on the original module are needed at time of order. Please add this detail to any online order.

Multi Point Controller configuration is by our class leading Workbench software and the I/O mapping is as simple as clicking the grid.

The post Digital WP2P Module – Single Unit appeared first on DATRAN Australia.

8 Digital & 2 Analogue I/O, wireless remote control solution
The Q48-P2P system provides a remote control solution Monitoring up to eight digital switches and two analogue sensors. As well as controlling up to 8 digital relays and two analogue outputs per Q48 module.
Each Q48-P2P system comprises a pair of modules that are preprogrammed with a unique common communication address, thus allowing for multiple Q48-P2P systems to be used within the same general location.

This system can be considered as a multicore cable replacement option, without the hassle of trenching and installation.

There is no configuration or setup required, simply connect the I/O and DC power and go.

Features

• Inputs/Outputs: 8 Digital Inputs, 8 Digital Outputs, 2 Analogue Inputs, 2 Analogue Outputs
• Simple set up, no programming or configuration required
• Operational Range: Up to 4km with optional antennas (ranges are line of sight).
• State of the art digital radio using 900MHz digital modulation technology
• Power Supply – 12 – 30V DC

The post Q48 Point to Point (Q48-P2P) appeared first on DATRAN Australia.

The post Digital & Analogue Wireless Point to Point System appeared first on DATRAN Australia.

The Wireless Point to Point Repeater enables WP2P modules to cover far greater range or operate in locations with obstructions such as hills, vegetation or buildings. Using the Wireless Point to Point Repeater the wireless signal between the WP2P Modules can be diverted around or over the obstruction.

Each WP2P module in a system has a unique address that allows multiple systems to be used in the same location. Similarly, the repeater module is also tied to a specific set of WP2P modules thus increasing communication reliability.

Key Features

• Low power consumption, (~30mA), ideal for solar installations
• No programming or configuration required
• Line of sight operational range – distance from either of the WP2P modules to the Repeater
• Up to 350m with the supplied antennas and up to 2km with an optional whip antenna.
• State of the art digital radio using 900MHz Digital Modulation technology
• Link Status LED helps diagnostics and shows when the Repeater receives data from a WP2P module

The WP2P Repeater module  can be used with both the Digital I/O WP2P modules and the Analogue I/O WP2P modules. All operating distances are indicative only and terrain dependent.

The post Wireless Repeater appeared first on DATRAN Australia.

• Switch up to 24 pumps or irrigators on and off remotely
• Expand and/or replace existing cable based control systems with quality wireless technology
• Start and stop multiple pumps from a central location
• Monitor electrical faults from many locations at a central point
• Confirm if your irrigator is switched on and pumping water
• Operate multiple devices around your site from a single button press

Key Features

• Low power consumption, ideal for solar and battery installations
• Line of sight operational ranges of up to 4km with optional high gain antennas. Distances are indicative and are terrain dependent.
• State of the art digital radio using 900MHz Digital Modulation technology
• Simple configuration using “Workbench” software and configurable output hold "fail safe" options
• Fault alarm indication when any WP2P module is not communicating
• Competitive pricing

The post Multi Point Controller (MPC) appeared first on DATRAN Australia.

The Digital WP2P system is a wireless remote control solution. Each module has three switched inputs & three relay outputs. Simply operate a switch at one end and the relay at the other end operates, allowing you to remotely monitor & control three independent devices.

The modules are supplied as a matched pair - there is no configuration or programming required, simply wire the connections and connect the power.

This innovative and cost effective system allows you to:

• Switch a pump, irrigator or solenoid valve on and off remotely
• Confirm if your irrigator is switched on and pumping water
• Open an electric gate and then turn on a light
• Send flow meter pulses across a field, without installing expensive cables
• Replace an existing 6 core signal cable with wireless technology

Key Features:

• Low power consumption, typically 6mA, making it ideal for solar or battery installations
• No programming -  modules are paired ready for use
• Easy mounting and installation
• Pricing shown is for a pair of matched WP2P modules
• Line of sight distances of ~350m with the supplied antennas, ~2km with whips, ~4km with Yagi antennas
• Radio communications confirmed with Link Status LED
• State of the art digital radio using 900MHz Digital Modulation
• Configurable "failsafe" output hold feature on latest Rev E version
• WP2P Star configuration options also available using four modules
• DIN Rail Mounting Option - Simplify panel installation with the optional DIN rail mount.

900MHz radio systems work reliably with clear “line of sight”. If this is not possible, consider using our WP2P Repeater and/or optional antennas.

This product requires an antenna and DC power supply.

Please select the most suitable option for your application from our range of Antennas & Accessories.

The post Digital Wireless Point To Point (WP2P) System appeared first on DATRAN Australia.