Cellular Archives - DATRAN Australia https://www.datran.com.au/product-tag/cellular/ Wireless remote control and Cellular SMS solutions Tue, 07 Apr 2026 23:51:48 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9.4 https://www.datran.com.au/wp-content/uploads/2021/01/cropped-D-1-32x32.png Cellular Archives - DATRAN Australia https://www.datran.com.au/product-tag/cellular/ 32 32 CM910 4G Cellular Modem https://www.datran.com.au/product/cm910-cellular-modem/?utm_source=rss&utm_medium=rss&utm_campaign=cm910-cellular-modem Mon, 03 Feb 2020 22:58:58 +0000 https://www.datran.com.au/?post_type=product&p=1393 The QTech CM910 Cellular Modem is a standalone 4G LTE cellular modem, suitable for mobile, industrial and general purpose communications applications. An ideal M2M platform providing for SMS and data connectivity via a Serial or USB (2.0) interface.

Modem specifications:
3G bands (MHz): B1(2100), B5(850), B8(900);
4G bands (MHz): B1(2100), B3(1800), B5(850), B8(900), B28(700).
Built in UDP/TCP/FTP/SMTP stack.
Operates with the Standard and extended AT command set.

Key Benefits

  • No static IP-address needed
  • Low power consumption
  • Low running costs and easy to install
  • DATRAN XL4 Plus is CM910 aware
  • Wide range of operating voltages from 9-24V DC
  • Connectivity with all current New Zealand and Australian telecommunication companies

Enable high speed TCP data connections with your SCADA sites. Simple low cost implementation makes an ideal solution for those non-critical sites where guaranteed radio communication is not so essential or where radio paths do not exist.

This product requires an antenna and power supply. Please select the most suitable option for your application from our range of Antennas & Accessories

The post CM910 4G Cellular Modem appeared first on DATRAN Australia.

]]> PD9243 Multiband 2dBi Cellular Vertical Fiberglass Whip https://www.datran.com.au/product/multiband-2dbi-cellular-vertical-fiberglass-whip/?utm_source=rss&utm_medium=rss&utm_campaign=multiband-2dbi-cellular-vertical-fiberglass-whip Mon, 17 Jun 2019 13:27:22 +0000 https://www.datran.com.au/?post_type=product&p=1185 Omni-directional whip antenna suitable for use on 4G and 3G networks.

The post PD9243 Multiband 2dBi Cellular Vertical Fiberglass Whip appeared first on DATRAN Australia.

]]> COL8195 5G LTE Cellular Antenna – 698-3800MHz https://www.datran.com.au/product/col8195-5g-lte-cellular-base-antenna-698-3800mhz/?utm_source=rss&utm_medium=rss&utm_campaign=col8195-5g-lte-cellular-base-antenna-698-3800mhz Mon, 30 Jul 2018 16:28:38 +0000 http://www.datran.com.au/?post_type=product&p=1012 The new COL8100 Series 5G LTE antennas covers both the 4G LTE bands (698-960 MHz, 1710-2170 MHz, and 2300-2700 MHz) and the new 5G LTE band (3400-3800 MHz).
They are ideal for use with cellular modems & active repeaters, especially when signal is poor.
The outstanding performance of the COL8100 series lies in the use of the patented Meander™ radiating elements.
These Meander™ circuits are coupled together to deliver extraordinary consistency in gain, coverage pattern and bandwidth. The result is a unique antenna able to operate across all mobile phone networks globally, housed in the one unit.
The COL8100 Series is supplied with a 200mm x 19mm stainless steel mounting tube which is designed to be mounted to a vertical support structure using the two supplied stainless steel hose clamps.

The post COL8195 5G LTE Cellular Antenna – 698-3800MHz appeared first on DATRAN Australia.

]]> SMS Lite 4G https://www.datran.com.au/product/sms-lite/?utm_source=rss&utm_medium=rss&utm_campaign=sms-lite Thu, 13 Apr 2017 19:05:00 +0000 http://101.0.116.204/~datran/?post_type=product&p=249 Remote Control & Monitoring Solution
The SMS Lite is a 4G cellular controller. It uses SMS/text messages to provide up to four people with status conditions, notifications and control options for its four switched inputs and two relay outputs.

The SMS Lite is operational within minutes - the minimum configuration requirement is simply registering a single cell phone number.

All setup is done by sending text messages. Configuration software is not essential but can be used for firmware upgrades.

You can check the status of the devices, receive notifications and manually control the output relays of the SMS Lite all from your cell phone.

Supports 4G bands B1 (2100MHz), B3 (1800MHz), B5 (850MHz), B8 (900MHz), B28 (700MHz) and legacy 3G bands.

 Key Features

  • EASY TO USE - Once wired, the unit can be configured by text messages within minutes.
  • REMOTE CONTROL - Switch connected devices on or off remotely.
  • WIRELESS TECHNOLOGY - Send and receive signals over the cellular network. No need for expensive cabling or travelling to remote sites.
  • 2 OUTPUT RELAYS - Output relays are controlled by sending a text containing on, off or pulse instructions.
  • 4 INPUTS - Once configured you will receive a text each time any of the inputs turns on or off.
  • SMS CONTROL & NOTIFICATION - Receive text messages with status conditions, notifications and control options for up to 8 people.
  • SHARED RESPONSIBILITY - Automatically escalate alarms if busy or no reply - escalation time and notification only mode are configurable options.
  • BROADCAST MODE - Send an alarm to all phones - configurable option.
  • SUPPLY VOLTAGE MONITORING - Automatic DC supply low voltage alarms.
  • STATUS UPDATES - Check the status of your device from anywhere, anytime within cellular range.
  • ENDLESS POSSIBILITIES - Versatile, reliable and suitable for many applications including remote generator starting, sports field lighting control , flood mitigation systems and alarm system notifications. Popular examples of text alarms are listed here.
  • LOW POWER CONSUMPTION - Ideal for Solar Power Installation.
  • DIN RAIL MOUNTING OPTION - Simplify panel installation with the optional DIN rail mount.

The 4G SMS Lite is the perfect choice for low cost, low power applications - please watch these short training videos to see just how easy the set up is.

The SMS Lite is supplied with a small stub antenna but also requires a power supply such as our 230V Plug Pack or a DC power cable.

The post SMS Lite 4G appeared first on DATRAN Australia.

]]> SMS Controller 4G https://www.datran.com.au/product/sms-controller-4g-3g-quad-band/?utm_source=rss&utm_medium=rss&utm_campaign=sms-controller-4g-3g-quad-band Sun, 09 Apr 2017 19:02:42 +0000 http://101.0.116.204/~datran/?post_type=product&p=138 The QTech 4G SMS Controller uses SMS/text messages and provides multiple people with alarms, status conditions and the ability to control devices (and receive a confirmation SMS) - all from your smart phone.

Supports 4G bands B1 (2100MHz), B3 (1800MHz), B5 (850MHz), B8 (900MHz), B28 (700MHz) and legacy 3G bands.

Key Features Include

  • Class leading intuitive user interface software
  • SMS Controller to SMS Controller texting. Multiple controllers can text each other allowing you to build a network
  • Text the SMS Controller "status" to receive the current I/O status
  • Count flow pulses and provide a daily total to your phone
  • Multiple I/O: Digital inputs x8, Analog Inputs x2, Digital outputs x8, Analog outputs x2
  • Up to 10 people can be added to the address book
  • Up to 4 actions can be taken per I/O point
  • USB programming
  • Forgotten the message format? Simply text the SMS Controller for a list of available commands
  • Pulse output for digitals - text "Pulse" for a 1 second output, perfect for overload/reset applications
  • Common text alarm examples are listed here

Click here to download SMS Messenger Workbench_v1.7

The 4G SMS Controller requires a DC power supply, antenna and SIM card.

Please select the most suitable option for your application from our range of Antennas & Accessories.

The post SMS Controller 4G appeared first on DATRAN Australia.

]]>