QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS485 appeared first on DATRAN Australia.

QDRs provide low cost RS485 or RS232 cable replacement options and are ideal for use between DATRAN RTUs and expansion modules, or between industrial controllers and sensors.

Application examples include RS232 master/slave configuration, as a "Point to Point" system or even as a "repeater" for more challenging projects within certain packet size limitations (see the datasheet for more information).

Key Features include:

• • Point-to-point and point-to-multipoint configurations available
  • Outdoor range of up to 6km with with optional 6dB Yagi or Whip antennas
  • 6 radio channels
  • 9600bps Data Rate
  • Maximum packet size 255 bytes
  • USB port for configuration
  • Current Consumption 150mA max
  • Outstanding receiver sensitivity of -110 dBm
  • 900 MHz digital modulation communications

Each QDR module requires an antenna.

Please select the most suitable option for your application from our range of accessories.

The post QDR 900MHz Digital Radio RS232 appeared first on DATRAN Australia.

Ideal for programming and configuration of the QTech MPC, SMS Controller and Wireless Point to Point (WP2P) modules (v4.10+).

The post USB Programming Cable – Type A-B appeared first on DATRAN Australia.

The Multi Point Controller allowing you to create a network of up to eight slave modules over a range of 4km.

Each of the WP2P Slave Modules has three switched inputs and three relay outputs. Now you can operate any of these I/O from the Multi Point Controller and even 'patch' the I/O to other WP2P Slave Modules.

The latest Rev E modules also have a configurable "failsafe" relay output hold function, link and status indicators.

The WP2P Star system is a custom configuration option based on the popular WP2P Digital system.

WP2P star system comprises up to four WP2P modules. One module is configured as a master, and the other three as slaves and maps the I/O between the modules.

The WP2P's do not come with DC power supplies or DC power cables, please select the most suitable option for your application from our range of Accessories.

The price of this unit is for a single unit, please specify the required quantity.

If you need a replacement module for any existing system, the radio code details printed on the original module are needed at time of order. Please add this detail to any online order.

Multi Point Controller configuration is by our class leading Workbench software and the I/O mapping is as simple as clicking the grid.

The post Digital WP2P Module – Single Unit appeared first on DATRAN Australia.

This part number allows you to purchase replacements or spares.

Ideally suited for short range indoor applications or for testing.

This antenna is not suitable for use with our high power Q48 P2P or MPC products.

Click here for higher gain and outdoor mounting alternatives.

The post PD9232 900MHz Stub Antenna appeared first on DATRAN Australia.

This part number allows you to purchase replacements or spares.

Ideally suited for indoor applications in high 4G signal strength locations.

Click here for higher gain and outdoor mounting alternatives.

The post PD9230 Cellular Stub Antenna – Quad Band appeared first on DATRAN Australia.

The UPS - 12V DC 18W Plug Pack is suitable for all of the SMS Lite and Wireless Point to Point (WP2P) modules from DATRAN Australia.

Other applications of the Mini UPS include routers, modems (including fibre optic), VOIP phone systems, surveillance equipment, alarm systems and many telecommunications devices.

The UPS is supplied with a 2m output cable and a selection of interchangeable DC male jacks, including the 2.1mm DC jack for the SMS Lite and WP2P products.

The UPS is suitable for proving emergency power backup for:

SMS Lite - part number PD8640-4G

WP2P Digital - part number PD8810E-WP2P

WP2P Analogue - part number PD8812E-WP2P-A

WP2P Slave (for MPC systems) - part number PD8810E

WP2P Repeater - part number PD8811E

Please ask about our full range of antennas and other accessories. for our wireless control solutions.

For more information please contact our sales and support team.

The post DC Mini UPS – 12V 18W Plug Pack appeared first on DATRAN Australia.

The mounting bracket provides easy DIN rail mounting options in switchboards or control panels.

The mounting bracket is made from 2mm mild steel with a powder coated finish and is supplied complete with an aluminium DIN rail clip.

Two sets of mounting holes are provided on the bracket to suit different QTech product ranges.

The DIN rail bracket mounts the SMS Lite WP2P module vertically to minimise the DIN rail space used.

The DIN rail mount is suitable for:

SMS Lite - part number PD8640-4G

WP2P Digital - part number PD8810E-WP2P

WP2P Analogue - part number PD8812E-WP2P-A

WP2P Slave (for MPC systems) - part number PD8810E

WP2P Repeater - part number PD8811E

All mounting holes are for 4mm fixings.

Please ask about our full range of antennas and accessories. for our wireless control solutions.

For more information on the DIN rail mount please contact our sales and support team.

The post DIN Rail Mount appeared first on DATRAN Australia.

The TLM from Water-Insight is a compact and cost effective water tank level monitoring system.

Our web-based dashboard technology provides you with tank level information and alerts for both critical water levels or significant rates of change.

The TLM can also be used "stand alone" or integrated into our IMS platform, to give you both tank levels and fixed grid irrigation on the same system.

The TLM uses a quality stainless steel immersed pressure sensor which is easily installed in your tank.

It has an environmentally protected enclosure complete with solar panel charging, high capacity back up battery and stainless steel brackets.

Tank level readings are transmitted via LoRa radio to a gateway receiver which connects to the internet.

The system doesn't need cellular coverage and the robust antenna helps gives a range of many kilometres between the tank and the gateway.

Set up and configuration is easy thanks to a "self service" website. Alerts are configurable and can be sent to multiple people via SMS/text, email or push notifications.

The TLM is suitable for monitoring water tanks on farms, industrial sites as well as lifestyle blocks in semi-urban areas.

Tank Level Monitor Datasheet

Tank Level Monitor Brochure

Tank Level Monitor User Guide

The post Water Tank Level Monitor (TLM) appeared first on DATRAN Australia.

A 12V DC (+/- 10%) power supply is required, at an operating current of 2 to 12mA.
The 12V DC supply is applied to the +12V and GND terminals of the LSD01.
• The solenoid valve is controlled by the RLY terminals on the LSD01, which operate as a trigger.
When the RLY terminals are closed the solenoid valve will turn ON. When the RLY terminals are opened the solenoid valve will turn OFF.
• The solenoid valve coil wires are connected to the LSD01 terminals labelled BLK and GRN.

Note – If the solenoid valve operates in reverse, simply swap the BLK and GRN wires on the LSD01.

Latching coils and the QTech wireless controllers are low power and ideal for being solar powered.
The latching solenoid driver can be integrated into our custom remote solar power solutions (RSS01 and RSS02).

The post Latching Solenoid Driver appeared first on DATRAN Australia.